Viking PTFE Teflon Thread Seal Tape, 12mm X 10m

Material: PTFE (Polytetrafluoroethylene) - Teflon Size: 12mm width × 10m length Application: Threaded pipe connections (water, gas, air) Temperature Range: -240°C to +260°C Features: Chemical resistant, non-toxic, easy application

Product Highlights

• Material: PTFE (Polytetrafluoroethylene) - Teflon
• Size: 12mm width × 10m length
• Application: Threaded pipe connections (water, gas, air)
• Temperature Range: -240°C to +260°C
• Features: Chemical resistant, non-toxic, easy application

Product Description

Viking PTFE Teflon Thread Seal Tape is the professional's choice for creating reliable, leak-free threaded connections in plumbing systems. Manufactured from high-quality PTFE (polytetrafluoroethylene), this tape fills the microscopic gaps between male and female threads, preventing water, gas, and air leaks while allowing easy assembly and disassembly of fittings. The 12mm width provides optimal coverage for standard plumbing threads, while the 10-meter length offers excellent value for multiple installations.

The tape's non-adhesive design lubricates threads during assembly, reducing installation torque and preventing galling or seizing of metal threads. PTFE's exceptional chemical resistance makes it suitable for potable water, natural gas, LPG, compressed air, and various industrial fluids. Unlike liquid sealants, PTFE tape won't contaminate water systems and provides instant sealing without curing time. Essential for CPVC brass threaded adapters, ball valves, and all threaded plumbing connections, this tape ensures professional-quality installations.

Recommended Applications

• CPVC Brass Fittings: Sealing threaded brass adapters, unions, and connectors in CPVC systems
• Water Supply Lines: Threaded connections for taps, showers, geysers, and fixture supply lines
• Gas Connections: Natural gas and LPG threaded fittings (use yellow gas-rated tape for gas)
• Ball Valve Threads: Sealing threaded ball valves and shut-off valves
• Overhead Tank Fittings: Tank nipples, float valves, and threaded tank connections
• Compressed Air Systems: Pneumatic fittings and air compressor connections

Application Guidelines

FAQs

1) How many wraps of PTFE tape should I apply?

For standard plumbing applications, apply 3-4 wraps of PTFE tape around the male threads. For larger diameter pipes (above 1 inch), use 4-5 wraps. The tape should fill the thread valleys but threads should still be visible. Too little tape causes leaks, while too much tape can crack fittings or prevent proper thread engagement.

2) Which direction should I wrap PTFE tape?

Always wrap PTFE tape in the clockwise direction when looking at the pipe end (same direction you'll turn the fitting to tighten it). This ensures the tape tightens and stays in place during assembly rather than unwrapping. Wrapping in the wrong direction causes the tape to bunch up and fail to seal properly.

3) Can I use PTFE tape on CPVC solvent weld fittings?

No, PTFE tape is only for threaded connections, not solvent-welded joints. Use PTFE tape on brass threaded adapters (MABT, FABT), threaded ball valves, unions, and tank nipples in CPVC systems. For solvent weld joints, use only Ashirvad CPVC solvent cement without any tape or sealant.

4) What is the difference between white and yellow PTFE tape?

White PTFE tape is for water and general plumbing applications. Yellow PTFE tape is thicker and specifically rated for gas applications (natural gas, LPG) with higher density for better sealing. Always use yellow gas-rated tape for gas connections and follow local codes. Never use white tape for gas as it may not provide adequate sealing.

5) Can PTFE tape be reused if I disassemble a fitting?

No, always remove old PTFE tape and apply fresh tape when reassembling threaded connections. Used tape becomes compressed and damaged, losing its sealing ability. Clean threads thoroughly with a wire brush or cloth, removing all old tape residue before applying new tape. Reusing old tape is a common cause of leaks in plumbing repairs.

Why Buy from HomeRun?

Returns & Exchange Policy

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details