Ashirvad Flowguard Plus CPVC Step Over Bend

Material: CPVC (Chlorinated Polyvinyl Chloride) Configuration: U-shaped offset bend Temperature Rating: Up to 93°C (200°F) Pressure Rating: SDR-11 (PN 15 / 15 kg/cm²) Connection: Socket type (Solvent Weld)

Product Highlights

• Material: CPVC (Chlorinated Polyvinyl Chloride)
• Configuration: U-shaped offset bend
• Temperature Rating: Up to 93°C (200°F)
• Pressure Rating: SDR-11 (PN 15 / 15 kg/cm²)
• Connection: Socket type (Solvent Weld)

Product Description

Ashirvad Flowguard Plus CPVC Step Over Bend provides an elegant solution for routing pipes around obstacles while maintaining parallel alignment. This U-shaped fitting creates a vertical offset that allows pipes to step over obstructions like beams, conduits, or other pipes, then return to the original horizontal plane. The precision-molded design ensures smooth flow transitions and maintains full system pressure rating.

Essential for professional installations where pipes must navigate around structural elements or other utilities without changing the overall pipe direction. The step over bend eliminates the need for multiple elbows and straight pipe sections, simplifying installation and reducing potential leak points. Ideal for ceiling-mounted installations, wall crossings, and situations where maintaining pipe alignment is critical.

Recommended Applications

• Ceiling Installations: Routing pipes over ceiling beams and structural elements
• Wall Crossings: Stepping over door frames and window headers
• Utility Crossings: Navigating over electrical conduits and other pipes
• Multi-Story Buildings: Maintaining pipe alignment while avoiding obstacles
• Renovation Projects: Routing new pipes around existing infrastructure
• Professional Installations: Creating neat, organized pipe runs in visible areas

Installation Guidelines

FAQs

1) What's the difference between a step over bend and using multiple elbows?

A step over bend is a single pre-formed fitting that creates the offset in one piece, while using multiple elbows requires four 90° elbows plus straight pipe sections. The step over bend provides faster installation, fewer joints, reduced leak points, and neater appearance.

2) What offset heights are available in step over bends?

Step over bends are available in various offset heights to clear different obstacle sizes. Common heights range from 50mm to 150mm. Check with your supplier for specific size availability and choose a height that provides adequate clearance for your obstacle.

3) Can step over bends be used in any orientation?

Yes, step over bends can be installed horizontally (most common), vertically, or at angles depending on your routing needs. However, they're primarily designed for horizontal installations where you need to maintain parallel pipe alignment while clearing obstacles.

4) Do step over bends affect water flow or pressure?

Step over bends create minimal flow restriction due to their gradual bends. The smooth internal transitions maintain good flow characteristics, though there is slightly more resistance than a straight pipe run. For most residential applications, the impact is negligible.

5) How do I support a step over bend installation?

Install pipe clamps within 300mm on both sides of the step over bend to prevent stress on the joints. The bend itself should be supported at its highest point if the span is long or if the pipe carries significant weight when filled.

Why Buy from HomeRun?

Returns & Exchange Policy

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details