Ashirvad Flowguard Plus CPVC Sweep Bend (Long Radius Bend)

Material: CPVC (Chlorinated Polyvinyl Chloride) Configuration: 90° Long Radius Bend (Sweep) Temperature Rating: Up to 93°C (200°F) Pressure Rating: SDR-11 (PN 15 / 15 kg/cm²) Connection: Socket type (Solvent Weld)

Product Highlights

• Material: CPVC (Chlorinated Polyvinyl Chloride)
• Configuration: 90° Long Radius Bend (Sweep)
• Temperature Rating: Up to 93°C (200°F)
• Pressure Rating: SDR-11 (PN 15 / 15 kg/cm²)
• Connection: Socket type (Solvent Weld)

Product Description

Ashirvad Flowguard Plus CPVC Sweep Bend provides the smoothest possible 90-degree direction change in CPVC piping systems. Unlike standard elbows with sharp turns, the sweep bend features a long, gradual radius that creates minimal flow resistance and turbulence. This design is particularly beneficial in applications where maintaining flow velocity and minimizing pressure drop are critical.

The extended radius reduces stress on the piping system during direction changes, making it ideal for drainage applications, pump discharge lines, and high-flow distribution systems. The precision-molded construction ensures consistent wall thickness throughout the bend, maintaining full pressure rating. Essential for professional installations requiring optimal hydraulic performance.

Recommended Applications

• Pump Discharge Lines: Smooth transitions from vertical to horizontal runs minimizing pressure loss
• High-Flow Systems: Main distribution lines requiring optimal flow characteristics
• Drainage Applications: Gravity-fed drainage systems benefiting from reduced turbulence
• Long Pipe Runs: Systems where cumulative pressure drop must be minimized
• Professional Installations: Commercial and industrial applications requiring maximum efficiency
• Riser Connections: Transitioning from vertical risers to horizontal distribution

Installation Guidelines

FAQs

1) What's the difference between a sweep bend and a regular 90° elbow?

A sweep bend has a long, gradual radius (typically 1.5-2x the pipe diameter) creating smoother flow with less turbulence and pressure drop. A regular 90° elbow has a short radius with sharper turn. Sweep bends are ideal for high-flow applications and pump discharge lines, while regular elbows are used where space is limited.

2) How much space does a sweep bend require compared to a standard elbow?

Sweep bends require significantly more installation space due to their long radius. A sweep bend typically needs 2-3 times the space of a standard elbow. Plan your layout accordingly, especially in tight spaces or concealed installations.

3) When should I use a sweep bend instead of a regular elbow?

Use sweep bends when: 1) Minimizing pressure drop is critical, 2) Installing pump discharge lines, 3) Creating drainage systems requiring smooth flow, 4) Building high-flow distribution systems, 5) Space allows for the longer radius. Use regular elbows for tight spaces and low-flow applications.

4) Do sweep bends reduce water hammer?

Yes, sweep bends reduce water hammer effects compared to sharp-radius elbows because the gradual direction change creates less turbulence and flow disruption. This makes them beneficial in systems with quick-closing valves or pump operations.

5) Are sweep bends available in all CPVC pipe sizes?

Sweep bends are typically available in larger sizes (20mm/3/4" and above) where flow optimization provides significant benefits. Availability may be limited in smaller sizes. Check with your supplier for specific size availability.

Why Buy from HomeRun?

Returns & Exchange Policy

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details